Friday, 24 January 2014

Repointing

This blog is in progress


I am about to repoint a chimney stack in the loft. I am gathering some case studies and refreshers on technique for the particular building I am working on.


Research links:

http://www.youtube.com/watch?v=mQqSWH82wMM

http://www.youtube.com/watch?v=v4HVjqCfNGE




Other jobs I am working on:


Radiator bleeding:

http://www.youtube.com/watch?v=bAeRurEExBs



Air brick cleaning


Cleaning out dust and anything that had gotten into the air brick will help keep the air flowing through the brick, as is its purpose.

Any blocked up air bricks should be unblocked/cleared using a long stick or rod. 




Sunday, 19 January 2014

Simple shelves

Recycled metal brackets and mdf shelves cut to size (2500mmx150mm), painted white emulsion) was used for these simple book shelves. The walls are old in this house and it was difficult to drill the holes but after perusing it for a bit longer, changing the screw type slightly, it worked out fine. I used three brackets to stop the shelves sagging and to make it all stronger. Fingers crossed they'll stay up ok after the books etc are in place.  🙏









Chandelier cleaning


Cleaning and repairing an old chandelier type light fitting.. 














I carefully took apart all pieces, cleaned the glass bits in soapy water, used toothpaste for the metal frame. I used small pliers to secure the glass droplets to the frame. Some were damaged, so I used wire to fix them. A few more bits to find and then it'll be good to go.

Sparkling.. 






Blackboard door panel



Today my task was to create a notice board for reminders, shopping lists and nice messages to check before leaving the house. This will help us remember school books, football kits and reminders about turning off the iron etc.. ☺️

Materials: 5mm panel board, saw to cut to size, blackboard paint, paint brush, screwdriver or tin opener to open paint tin, small wood screws, screwdriver, drill, imagination. 
Coloured or white chalk to write with. 

Lay out the board for painting 


Tools 


Ready to go - shake paint pot before use 
Cover any areas for paint spills 



Leave to dry 



Drill holes for screws in each corner, mark out in door and screw into place 
Easy peasy 




Ready for tomorrow's messages... 
Job done